Pinnacle-systems DR Instrukcja Użytkownika Pobierz pdf (Strona 11)

Speciﬁ cations

DIN-rail Controller Module

Input Power

24vdc +/- 20% (7 watts max)

Input Fuse

1 amp fast blow (pico size)

Relay Outputs

K1, K2 Safety N.O.

8A@250v resistive

(4A@120vac recommended max)

130V surge suppression devices are installed

inside the Controller Module. This limits the

recommended maximum voltage to 120VAC.

Please consult factory if you need to switch higher

voltages.

K3 Aux N.O. & N.C.

8A@250v resistive

(4A@120vac recommended max)

K4 Fault N.O.

8A@250v resistive

(4A@120vac recommended max)

Indicators

External:

OK/CLEAR Green LED

BLOCK/FAULT Red LED

BLANKING ACTIVE Yellow LED

BLOCKED Red LED

Internal:

D1 +5v Yellow D3 +12v Red

D14 K2 relay Green D13 K1 relay Green

D16 K3 relay Green D15 K4 relay Green

D19 +5v Yellow D18 -5v Green

Construction

Controller Module: DIN-rail mountable

polycarbonate housing providing IP40 protection,

UL94V-1.

Pylons: Painted aluminum extrusion with

polycarbonate IR lens and Viton seals providing

NEMA 12, 13 protection. An optional polycarbonate

tube provides NEMA 4 protection.

Cables: Shielded PVC 22 AWG stranded.

Standard length: 20’ Emitter; 8’ Receiver

Temperature Range

0 to 50°C (up to 95% humidity, non-condensing)

Dimensions

Controller Module: 5.87” length X 2.95” width X

4.33” height DIN-rail mount is 35.5mm (1.4”) wide.

Pylons: 1.45” square.

Beam Spacing

.5” (12.7mm) standard

1” [25.4mm] (optional). The Floating Blank option

changes the effective beam spacing.

Minimum Object Sensitivity:

.5” (12.7mm) beam spacing is .55” (14mm)

1” (25.4mm) beam spacing is 1.18” (30mm)

Response Time < 30 mSec total

Scanning Frequency 5.9 KHz

Shock Tested to withstand high vibration applications

Self-Checking every 20 milliseconds

Scanning Distance All units are supplied standard

with a 20’ scanning capability. Extended range units

are available and must be speciﬁ ed (35’ maximum).

Maximum Operating Distance Stated as last two

digits in model number

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Komentarze do niniejszej Instrukcji

Brak uwag

Pinnacle-systems DR Instrukcja Użytkownika Strona 11

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Przekaźnik Pinnacle-systems DR